CBL Solid-lubricating And Maintenance-free Sliding Bearings

The Advantages of The Solid-Lubricant-Inlaid Bushing

1. Properly and simply designed, widely used;

Oil offering system is an energy waste and time waste set in mechanical design. There is no needs for considering the oil-putting set in design when using the solid lubricant bushing so it can save the oil-putting equipment and at the same time it also design the solid-lubricant-inlaid bushing into alt kinds of shapes in order to meet various needs in special places. Using solid-lubricant. inlaid bushing can reduce the costs of the machinery mending and the oiI in wide range.

2. Being used without oil;

Because of the linear coefficient expansion of the solid lubricant is bigger than that of the metal basement, when the solid-lubricant-inlaid bushing starts to operate, the oil film can transfer to the corresponding friction set to make out self-lubricant. So the solid-lubricant-inlaid bushing can be used in places where the oil or grease cannot be added. It can make out the self-lubricant function even though under high load conditions.

3. Low cost for usage;

Traditional mechanical design asks for frequently aiding oil and checking if the oil watch and the offering set are through in certain period. Because adding oil at regular intervals causes the pollution to the machine itself and the nearby surroundings and increase the maintenance cost. And when the self-lubricant is made out, it can not only make the surroundings clean but also decrease the cost of using the Iubricant.

4. The superior functions can be brought into play under high load and low rotati ng peed.

The solid-lubricant-inlaid bushing is based on the high intensity brass that is centrifuge cast. And then make out the loading function. Use special graphite that has good self-lubricant properties as lubricant to make out the self-lubricant so that the bushing has included all of their advantages. It can still bring the superior properties into play even under high load and low rotating speed.

5. The wear resistance can be brought into play even ln places the oil film form into difficulties because of the reciprocating  and rocking movement, starting and stopping;

The arrangement principle of the lubricant of the solid-lubricant-inlaid bushing is to ensure that all the parts of the corresponding friction sets have the lubricant function in the operating procession. So the arrangement place 0f the lubricant should be depended upon the operating direction of the corresponding friction sets.

6. Superior chemical resistance and corrosion resistance;

The lubricant of the solid-lubricant.inlaid bushing is made of special graphite and PTFE. It has steady molecule structures. The metal basement can be chosen according to the different chemicaI resistance and corrosion resistance of the metal appliance. So the solid-lubricant-inlaid bushing has the superior chemical resistance and corrosion resistance.

7. The products is more competitive, comparing to the similar kinds of products, this kind of products has longer working life and need seldom maintenance. It has longer replacement ci rcle and good properties.

Copyright © 2016 All Rights Reserved      Jiashan CBL Bearing CO., LTD.        Design: landoobarand

Link name:Bearing Suppliner